RACEROMS
ENΕΛ
Engine · Audi S3 8P 2003 - 2008

S3 2.0 TFSi

Explore available calibrations, measured performance figures, and options for this engine.

Fuel
Gasoline
Stock power
265 hp
ECU access
Standard access
Available calibrations
7
Request a quote
Audi · S3

Performance

Power+35 hp · +13%
300hp265 hp
Torque+70 Nm · +20%
420Nm350 Nm
Available options

Details that can be tailored alongside the calibration.

Launch Control

No-Lift Shift

Map Switching / Multimap

Pops and Bangs

Pops & Bangs (Crackle Map / Burble on Overrun / Schubblubbern) Pops & Bangs is the distinctive crackling sound you hear from the exhaust when you lift off the throttle. This effect is created when controlled amounts…

Start Stop De-activation

Start/Stop Disable – Keep Your Engine Running at Every Stop This function ensures that your vehicle does not automatically shut off the engine when coming to a stop. Many modern cars are equipped with an automatic…

Exhaust Flaps Control

Exhaust Flap Control – Adjust Your Exhaust Sound Anytime You Want Exhaust Flap Control gives you the ability to manually control when the exhaust valves open or close. When the valves are closed, the exhaust runs in…

Hard Rev Cut

Hard Rev Cut – Real Redline Power and Maximum Performance to the Limiter Hard Rev Cut allows the engine to reach maximum RPM without the ECU slowly reducing acceleration before hitting the limiter. In most factory…

What happens on the day

  1. 01

    Diagnostic check

    We inspect the whole vehicle before making any change.

  2. 02

    Baseline dyno run

    Stock output is measured on your own vehicle.

  3. 03

    Backup and calibration

    The factory file is saved before a safe, tailored calibration.

  4. 04

    Final run and handover

    We verify the datalogs and give you the results.