Engine · Audi RS3 8V 2015 - 2016

RS3 2.5 TFSI

Explore available calibrations, measured performance figures, and options for this engine.

Fuel
Gasoline
Stock power
367 hp
ECU access
Standard access
Available calibrations
7
Request a quote
Audi · RS3

Performance

Power+43 hp · +12%
410hp367 hp
Torque+135 Nm · +29%
600Nm465 Nm
Available options

Details that can be tailored alongside the calibration.

Launch Control

Pops and Bangs

Pops & Bangs (Crackle Map / Burble on Overrun / Schubblubbern) Pops & Bangs is the distinctive crackling sound you hear from the exhaust when you lift off the throttle. This effect is created when controlled amounts…

Start Stop De-activation

Start/Stop Disable – Keep Your Engine Running at Every Stop This function ensures that your vehicle does not automatically shut off the engine when coming to a stop. Many modern cars are equipped with an automatic…

Cold Start Delete

Cold Start Delete – No More Loud High-RPM Warmups The catalytic converter only works efficiently when it reaches high operating temperature. To reduce emissions, modern vehicles use a Cold Start strategy that rapidly…

Exhaust Flaps Control

Exhaust Flap Control – Adjust Your Exhaust Sound Anytime You Want Exhaust Flap Control gives you the ability to manually control when the exhaust valves open or close. When the valves are closed, the exhaust runs in…

Hard Rev Cut

Hard Rev Cut – Real Redline Power and Maximum Performance to the Limiter Hard Rev Cut allows the engine to reach maximum RPM without the ECU slowly reducing acceleration before hitting the limiter. In most factory…

What happens on the day

  1. 01

    Diagnostic check

    We inspect the whole vehicle before making any change.

  2. 02

    Baseline dyno run

    Stock output is measured on your own vehicle.

  3. 03

    Backup and calibration

    The factory file is saved before a safe, tailored calibration.

  4. 04

    Final run and handover

    We verify the datalogs and give you the results.